Couldn’t find anything with less pixels, please save to disk and remove resolution yourself ❤️

  • lauha@lemmy.one
    link
    fedilink
    arrow-up
    12
    ·
    16 days ago

    You still have to trust the manufacturer that it really turns the webcam off, not just the webcam light.

        • mexicancartel@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          15 days ago

          I mean, someone will do for every model. That would be enough to ensure security. If manufacturer faked it, and one in a thousand customers found it, then it will be a news or a lawsuit

    • ichbinjasokreativ@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      16 days ago

      Hardware switches physically cut power to the device in question and you can take it apart and verify. There is no trust involved.

      • lauha@lemmy.one
        link
        fedilink
        arrow-up
        2
        ·
        15 days ago

        99.999% will not take it apart and verify. They will just “nice, a physical switch”. There is a lot of trust involved.

        • ichbinjasokreativ@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          15 days ago

          They don’t neccessarily need to, you can pretty much always just look at reviews. Now you can make a point about trusting reviewers, but all that is still better than trusting the manufacturer or microsoft.

          You’re right though, there is trust involved, but only if you don’t verify things yourself.

          • lauha@lemmy.one
            link
            fedilink
            arrow-up
            1
            ·
            15 days ago

            I have never seen a review opening a laptop to check if the hardware switch is really that. Please, link to a reviewsite that does that

    • ArcaneSlime@lemmy.dbzer0.com
      cake
      link
      fedilink
      arrow-up
      5
      ·
      15 days ago

      Unless you have a framework, and can remove the bezel and confirm that they work!

      I’m really happy with my new framework’s switches, I actually trust them for once! I went to find a thing on how they work to post here:

      "(They) saw the mention of the switches and that they are optical somewhere, but can’t remember to quote the source.

      As far as I can tell each switch is a U channel with a light emitter on one side, and a detector on the other. The part you move on the bezel just breaks the light beam. This creates a electronic on/off hardware switch.

      Using an actual physical switch would tend to be a source of an intermittent connection over time. Hence the use of optical technology. Same thought process for the screen open switch being a Hall Effect sensor, which can work through a cover."