Hi. I wanted to know if it’s needed to install a firewall on a linux desktop/laptop. Why yes or why no?
If your computer is connected to a network, I don’t see any downside of enabling a firewall. It’s a good security layer to have and costs basically no resources to keep running.
I guess a downside is having to fiddle with it, allowing stuff you want to get through. Sometimes it blocks stuff you don’t want blocked
I’d rather have to open up stuff my self then have an uninvited visitor doing it without me knowing about it.
Well sure, but I was commenting about the downsides
There is no reason not having a firewall
Yes, and hopefully you will have one preinstalled, blocking all incoming connections.
An outbound firewall like Opensnitch or Portmaster is also nice. But here I would say often you dont need one. Balena Etcher was the only App loading Ads, at all. Firefox and Thunderbird can be hardened. The rest is okay and doesnt phone home, Flatpak permissions ard also great.
Balena Etcher shouldn’t be loading ads. Where did you install it from?
Official website. They just advertise their own products which I consider Adware
Linux comes with a default firewall it’s called IPtables/NFtables, Just make sure that it’s on. Example I Ubuntu Sudo ufw enable.
Actually it’s Netfilter. IPTables is just a frontend.
Linux is a kernel. The actual tooling varies and isn’t always preinstalled
Why not? It’s comically easy to set up one.
deleted by creator
If you allow the whole subnet you might as well not use a firewall. Your router has one and port forwarding is disabled by default.
deleted by creator
Your isp firewall uses nat, and a hacked isp gateway or some other device that had ports forwarded to it are the most likely things to be reaching into your network. They’ll be on that subnet.
deleted by creator
Yes, they’re giving “very simplistic” and also demonstrating how to deny and add access in multiple ways.
It’s also not uncommon to do things like that. The default firewall config in Fedora is wide open for every port above 1024.
deleted by creator
I set up a rule last night to allow SSH access from any device on my subnet, is it a good idea to add a separate rule blocking SSH from my router? I’ve already set up SSH with public key authentication so in theory there aren’t many devices that can access it but the firewall restriction seemed like a good idea
Yeah, I kind of agree. Unless this is a mobile device pretty much all traffic will come from within your subnet. I often deny incoming from my gateway (i.e. router) and poke holes as necessary.
ufw and docker don’t like each other
Can you elaborate on that? I’m curious what you mean.
I din’t have much time right now https://www.techrepublic.com/article/how-to-fix-the-docker-and-ufw-security-flaw/
It’s quiet old. Maybe it’s fixed now.
Thanks. So docker manipulates iptabels directly, thereby bypassing ufw rules. (Your previous comment was just really vague)
It’s also comically useless to have a desktop firewall application installed when you’re already behind some sort of firewall solution like a router not forwarding most incoming traffic.
It depends. Sure, maybe somewhat redundant for a home desktop that just stays at home on a network you control, but for a laptop it is absolutely essential.
You may also want a firewall to defend against other devices within your local network. Let’s say you have IoT devices, many of which are poorly secured and maintained by their manufacturers, or you live with family members or guests who don’t practice or even know about proper computing hygiene and are bringing in devices onto your local WiFi.
My IoT devices already have a dedicated network and guest can use my guest WiFi. But yes, you’re right. It depends. And especially for mobile devices some sort of local firewall solution could be relevant. If there are no ports exposed to the LAN you’re pretty save, though.
No you aren’t, browser based malware puts the attacker inside your fancy network. A basic firewall will greatly hinder any attack at basically no cost to you.
There’s incoming and then there’s outgoing traffic. Software firewalls can forbid processes that may be advertised as “offline only” from reaching out; typically a hardware firewall doesn’t care about this kind of thing.
Some people like hosting some servers on their desktop as well, and doesn’t want others on their local network to access them. With firewalls, you can allow specific IP address to reach those servers.
That’s fine right up until something on your network, even the ISP modem-firewall-router-switch itself, gets compromised.
Ironically enough if you do not know what a firewall actually does (and saying it “protects” against "stuff is NOT enough) IMHO you do need one. That being said unless you know what you are doing, better leave it to the default one with default settings.
Do you need a lock on the door of your place?
No, but it’s a damn good idea to protect whatever is in it.
That’s a bad comparison. Without a lock you can just open the door from the outside.
But… Is it?
It’s not.
If you have a house, it has a door which you can use to access everything inside.
If you have a linux install with no services running on it, it has no doors, and thus doesn’t need any door locks. And if it does have services running on there (which run publicly), it now has doors, sure, but getting one of those doors open doesn’t guarantee access to the whole house - usually it’s gonna be an empty room
Linux with no services? That’s not a usable system for anyone who would ask “do I need a firewall”
Systemd is a service that runs logind. What are you doing without them?
I think by services they mean self-hosted, web-based services, or things like sshd - services which work by actively serving connections on a particular port or ports.
And even then, a properly configured SSHD instance wouldn’t really benefit from a firewall, unless you wanted to block all countries besides your own or something.
On a laptop absolutely. My firewall on my laptop doesn’t let me discriminate between networks so I’m always worried someone will try to attack me on public WiFi for the few ports I want open
On a desktop on a network you trust less important but still no firewall means if another device on your network gets compromised you’re screwed
For laptop, what kind of attack would we be protecting ourselves from? I get the relevance of antivirus, VPN, and device encryption, but what about firewall?
Any vulnerabilities in any of your software that can talk to a network, ssh, browser, the operating system itsself could be exploited if your firewall is down
If you’re using username and password and have ssh enabled, for example anyone on your network could attempt to log in to your machine
For ssh, sure.
But a browser? No way.
My understanding is there can be a vulnerability in absolutely anything
Browsers are unlikely to but don’t think it’s impossible
A firewall protects open ports on your machine. A browser does not have any open ports.
Of course they have vulnerabilities, but a firewall won’t protect you from them.
Let’s just say the system does not have any outward facing service (no ssh, http, smb, nfs).
At that point why not just have the firewall set to deny everything just to be safe though? There’s always the chance you missed something that’s decided to listen on some random port and if you aren’t using anything that listens on a network why have the firewall open anyway
If you have the ability to take a look at either SANS website, and see their articles, or have your system show you all the automatic attacks hitting your machine, then maybe you will understand…
Botnets are coded to hammer-away at all possible internet-addresses, trying to break-in & highjack more machines, to include in the established criminal-machine that the botnet is…
SANS said, a decade or 2 ago, that it took, on average, something like 6 or 4 minutes for a new MS-Windows machine to be owned by some attack from the internet.
I’ve had linux machines cracked/owned, and wiped 'em to get 'em clean.
Having no immune-system is BAD.
Linux botnets, apple operating-system botnets, they exist.
I don’t think there is any operating-system that is connected to the internet that doesn’t have attacks coded to crack it.
I just looked at SANS.org, and they have totally changed, so they are now … more a moneymaking-machine wanting B2B biz?
Here, though, are some cheat-sheets they made:
https://www.sans.org/posters/?msc=main-nav
They used to tell us the top-20 most effective protections for particular threats, identifying how prevalent the threats were, etc…
No idea who does that nowadays…
Keep in mind that a firewall may not be nessasary if you don’t have any network services running.
Yes, except that whether you do is not at all obvious.
Do you use KDE Connect? If yes, you run a network service. Syncthing, a bittorrent client? Those too, and many others. I know this is a Linux community, but as a comparison windows has a bunch of network services running by default.
By saying “network services”, I think menu of us would just think about a web server or a file server, conclude that they don’t run any of those, and don’t bother with it.When in doubt,
sudo netstat -lutpn, and look for the listening ports to see what software listens for informing requests.I’d still have one, eventually something is going to slip past a new configuration or dependency that listens.
I’d say if you plan on using it any public places, or if you don’t have full control over all the computers/technology in your home network, it’s a good idea to run one. It’s a nice last resort should someone on the same lan have a piece of malicious software.
Yes, because while I trust my device, I do not trust the Chromecast or the WAP to not be an asshole and fuck with things.
You shouldn’t trust your device. Modern software is insanely complicated, even netbsd had an rce.
Trust may be the worng word as Windows will be Windows but I know that no one is going to zero day my devices because I am not that high value of a target.
That’s a bad mentally as well. Most stacks these days are about quantity not quality. If you blindly hit 10000 targets it’s more profitable than trying to spear a single one.
Akin to not wearing a seatbelt because you are unlikely to be killed by a sniper
No, you don’t. But it’s also not necessarily a bad idea if it’s not going to create issues for you.
Normally, a software package that wants to talk over IP and only wants to let local software communicate with it can listen only on loopback addresses (like 127.0.0.1). But I have definitely seen software packages that have defaulted to listening to the world (gpsd used to do this by default, for example, which would let anyone in the world who could talk to your machine see precisely where you were). Having a firewall makes the default to be secure – you know that the default is not to be reachable, regardless of what some software author thinks is a good idea.
Most home systems these days are generally behind a NATting router, which effectively firewalls them against the outside world (though maybe IPv6 will change this), so they can’t be directly reached from the outside anyway, unless a user has set up port forwarding on the router, the systems are effectively firewalled anyway, unless an attacker can get inside the network somehow.
It’s one more thing that you’re going to have to remember to deal with if you’re installing software and troubleshooting network problems. You install software package X and it isn’t reachable, you’re going to have to figure out how to diagnose problems. As long as this isn’t a problem for you…shrugs
I don’t personally run firewalls on my desktops. But I have also, over the years, occasionally checked
netstat -ntapand discovered that a service that I thought only listened locally was listening to the world, gpsd probably being the most-flagrant example.If I were not behind a router, or if I were forwarding all ports to my system, I would be firewalling my desktop systems.
On a dedicated server, I’d be less worried, because I’m not normally installing tons of random software on the thing. If you aren’t going to firewall it, though, be sure that you’ve checked to see what is listening on the server.
There is no reason to not leverage a firewall. Plenty of browser based malware can breach your home router and call back out to allow an attacker to explore your network. Windows has included a firewall for over a decade and it’s fine. You can with a single command enable Linux’s built in firewall and be glad you did the bare minimum of cyber security.
Windows network layer is a desaster. It is so bad, you could currupt the system with Ping in the past.
I would not say, you should not have a firewall on a desktop, but saying it’s a good idea bc/ windows makes me laugh.
I strongly disagree.
For example on systems based on Debian (running myself) which simply enables networked services by default running a firewall is a total no brainer. Same is true for literally every Linux distribution with dependency management.
Especially if someone asks, it is a strong indicator this person should run a firewall.
No - If you are aware which programs open incoming ports. E.g. check with netstat -tulpe
Yes - If you want to make sure e.g. TCP port 22 or a webserver on 443 etc is only available from IP/Adapter xy. Or if you want to mess with filtering outgoing connections.
ss -tulp
Its always a good idea. I have a firewall on my laptop since I travel and connect to many different networks.
I don’t run any services that would be broadcasting open ports but its always better to be safe
Hell, even if you don’t travel. You never know when something nasty is going to get loose on your network. Especially since most folks have some IoT things, and don’t bother to properly isolate them.
Yes, because you can forget what services are running and maybe they can be explited.
An example can be Syncthing which setting are done via web browser at port 8384. If you do not have a firewall, everyone on the same network would be able to change Syncthing settings and then sync your directories to their devices.
Is syncthing listening on all addresses, or only loopback? A firewall would block it, sure, but that would also be bad design.
Syncthing only listens on loopback by default unless you modify the config.
Good point, but syncthing only listens on localhost as others have said too.
However it still is a network service that can have vulnerabilities, besides many others like KDE Connect (which may be a target as one of its purposes is remote control and monitoring) or a bittorrent client
You most likely already have one installed, but not enabled. It doesn’t harm anything (maybe you need to allow traffic to ssh or other configuration, but after that you’re all set) and it’s a layer of protection, specially if you need to move between networks (public wifi etc).
On Mint the firewall is enabled by default. Setting up firewall rules is pretty easy though, so it’s worth taking five minutes to read up on it.
