TROY, Mich.—Despite US dominance in so many different areas of technology, we’re sadly somewhat of a backwater when it comes to car headlamps. It’s been this way for many decades, a result of restrictive federal vehicle regulations that get updated rarely. The latest lights to try to work their way through red tape and onto the road are active-matrix LED lamps, which can shape their beams to avoid blinding oncoming drivers.

From the 1960s, Federal Motor Vehicle Safety Standards allowed for only sealed high- and low-beam headlamps, and as a result, automakers like Mercedes-Benz would sell cars with less capable lighting in North America than it offered to European customers.

A decade ago, this was still the case. In 2014, Audi tried unsuccessfully to bring its new laser high-beam technology to US roads. Developed in the racing crucible that is the 24 Hours of Le Mans, the laser lights illuminate much farther down the road than the high beams of the time, but in this case, the lighting tech had to satisfy both the National Highway Traffic Safety Administration and the Food and Drug Administration, which has regulatory oversight for any laser products.

The good news is that by 2019, laser high beams were finally an available option on US roads, albeit once the power got turned down to reduce their range.

  • xodoh74984@lemmy.world
    link
    fedilink
    English
    arrow-up
    61
    ·
    1 month ago

    This problem desperately needs to be fixed, but the solution isn’t some expensive, over-engineered laser LED matrix. The solution is basic headlights that don’t blind people. You know, like every headlight that existed in the US until a few years ago.

    Surely it’s not an insurmountable task to use a cheap LED bulb with the optics to give the beam proper directivity—i.e. not direct the beam into the eyes off oncoming drivers. Maybe even make it replaceable with a screwdriver. Call me crazy.

    • mean_bean279@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      ·
      1 month ago

      I drive a Ram 2500… so I have like the worst LED lights for other people. What I don’t get is why they don’t automatically dim as I slow down. It’s now like your headlights are needed to see as far down the road when I’m doing 0mph. Just keep them at the minimum and increase brightness as I drive, and if it detects another car in front of me just reduce light output while drive to -10% from normal.