If I cannot root the device from the device (no option to install from usb) I’ll have to flash twrp-3.7.0_9-0-X00P.img from my computer (ubuntu 23.10) using fastboot (bootloader)
I plan to follow this instructions: https://xdaforums.com/t/recovery-unofficial-x00pd-v3-3-1-teamwin-recovery-project-24-06-2019.3942717/ unless you mean the instructions are outdated and I shouldn’t do this. However I have questions:
the link shows this command:
fastboot flash recovery $RECOVERYNAME
I don’t understand it: Do I have to change $RECOVERYNAME with twrp.img?
Neither do I understand what follows: Boot to OLD TWRP > INSTALL > Select Image > Navigate to twrp.img > Select it & Swipe to Flash, in the device? from my computer with fastboot? As of now there is no TWRP installed in the device.
help appreciated.
Yes.
The breakdown of that command:
fastboot - using the fastboot system
flash - flash (write) to the named partition
recovery - the partition to be flashed
recoveryname - the path to and filename of the image to flash
“Flashing” as a concept (and the origin of the name) goes back to the first EEPROM (Electronically Erasable Programmable Read-Only Memory) chips, which you programmed by literally flashing light onto it. UV maybe, no, think it was infrared? I forget, this was back in the 80’s, and EEPROM flashing was done with a little box with the light source in it with a holder for the EEPROM package.
thank you for breaking that command down for me. The command should look:
fastboot flash recovery /home/alice/TWRP/twrp.imgHowever, I still don’t understand this:
I haven’t named any partition, there is no path to the partition, is there?
Yes you did. It’s the recovery partition.
No.
thanks