I have a low power NAS (~35W) and I want to buy an UPS (uninterruptible power supply) to keep things running. The problem is most UPS for well known brands have an idle power usage (even without load) greater than 20W. It’s comprable with the NAS + HDDs + Network equipment…

Do you know any alternative? UPS battery for 10 minutes will be enough. UPS load could be very low < 50 W. UPS software is optional.

  • Qazwsxedcrfv000@lemmy.unknownsys.com
    link
    fedilink
    English
    arrow-up
    13
    ·
    edit-2
    1 year ago

    For such a small load, you may consider those surge protectors/power stripes with battery backup, e.g. APC Back-UPS 600VA. Or you can take a more DIY route and try those DC UPS circuits if your low-power NAS supports direct DC input, i.e. it has a barrel jack for power.

      • Qazwsxedcrfv000@lemmy.unknownsys.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        Indeed they are 😂. It is especially true with the newer gen products. A few years ago these “power stripes with battery backup” had much smaller capacity and fewer capability.

    • huojtkeg@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      Thank you for the link but I can’t see the unloaded power consumption in the specifications.

      I read about different UPS topologies and the model you suggested is “standby”, the most power efficient => https://unifiedpowerusa.com/ups-topology-optimal-environment/

      But some users report the “Cyberpower ValueUPS 600” (similar model) consumes - idle with nothing connected - 20W exactly

      • Qazwsxedcrfv000@lemmy.unknownsys.com
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        As far as I know the idle power varies from implementations to implementations, especially regarding charging. Also the idle power tends to grow when the battery ages (as the internal resistance increases).

        If you are interested in the APC one, it does not hurt shooting them an email asking for the rated idle power usage. From my experience, APC has been pretty eager to respond.