![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://linux.community/api/v3/image_proxy?url=https%3A%2F%2Flemmy.world%2Fpictrs%2Fimage%2Fe4083c7c-83c3-4258-8370-708e95e309b3.png)
Any particular reason? That’s a 10 (ish) year old design. Outside of nostalgia or deliberately checking out designs from that era, I see very little reason to pick this as a project.
Any particular reason? That’s a 10 (ish) year old design. Outside of nostalgia or deliberately checking out designs from that era, I see very little reason to pick this as a project.
Another name, depending on the exact context, is “hairpin NAT”. Should make googling with the specific router OP has easier.
Since you’re specifically looking to replace OneNote, you might want to take a look at BookStack. It has similar organizational concepts, and I think it’s FOSS.
One small addendum/correction: I meant Stealth changer (which is based on Tap changer), but got the names confused.
Not trying to make the choice harder, but mailbox.org seems to fit into the choices as well (also hostesd in Germany). Also in terms of hosting in Switzerland, keep in mind that it’s not actually part of the EU, which is the primary/original source for many of the privacy laws you probably care about if you’re looking into these providers.
Because they don’t want you to host things at your house, even though that’s perfectly fine from a technical standpoint. They might want to sell you a “business” line for this, or they just don’t want the traffic (since at least in my area, traffic is always included in any home Internet connection).
I know this post is quite a few days old already, but I still wanted to add a bit to the discussion.
The printers you list vary wildly. Both in terms of design goals (“what is the printer meant to do well”) and assembly requirement (from “ready to print in 10 minutes” to “you build this for like a week until something moves”). A Qidi is basically ready to go, a Prusa will take some time to put together (how much depends on if you got it as a kit or fully assembled). A Voron 2.4 takes about a week to build just for the printer, not including ERCF and/or tool changer, let alone tuning of said ERCF/tool changer.
Also there’s the Troodon, which is a Formbot prebuilt that is closer to a real Voron 2.4 than a Sovol SV08, just to add to your list. It has a stock stealthburner tool head compared to the proprietary thing that Sovol uses, for example.
I’ve recently built a Voron 2.4r2 (Formbot kit) and loved it, but it was like my 4th printer (and a previous printer was a self-sourced scratch build). So do you have experience with 3d printers, and building them or tinkering with them? I would probably not recommend building one otherwise, but it’s not impossible either, just expect a relatively steep learning curve if you have no prior experience.
Do you want to mostly just print in colors but same filament ype, or do you want to mainly have multi-material capabilities? So do you need 5+, or would 2 colors with the option to expand work for you?
If the Voron is a real option for you, I’d highly recommend it. Just make sure you’re going with a can-bus based build/kit (like Formbot). These days I wouldn’t go with an ERCF due to the complexity of building it and then setting it up, as tuning is supposedly a bit of a process. Also you mentioned that the amount of waste during multi-color prints is a real factor for you, and that puts single-nozzle systems inherently at a disadvantage as you just have to purge the hotend on every change. So I would suggest a tool changing system, and I would either start with that (but just 2 tool heads), or add it as the first project. Specifically, I would suggest using the Tapchanger as a modern system. Frankly adding a tool head like that is much less effort than building an ERCF, but also just adds 1 filament each and not like 9 at once.
Without more information what exactly you want to do/learn, that’s kinda hard. Racing? Acrobatics? Micros/Woops (flying in your home/garage)? Drone as a cinematic camera (DJI-style) or faster camera work (chasing motocross riders for video for example)?
Also specific recommendations for hardware heavily depend on this and just personal preference, and what else you might want to do with the radio and/or video equipment. As an introduction and overview, like someone else has already commented, check out Joshua Bardewell on youtube. He literally makes everything from introduction, basic tutorial, to advanced guides and deep dives into anything drone-related as his full time job.
All of the OpenTX/EdgeTX radios work on Linux as a controller, and generally most radios that support this probably will, because they just appear as a joystick (HID profile). There are also ways of connecting them other than just plugging the radio into usb and selecting “controller mode”, but even those usually result in a joystick device I think? So which radio in particular mostly depends on what kind of drone you want to fly, if you want to fly other things (plane, helicopter, scale models), or drive other things (cars/boats/crawling/scale models). Also ergonomics (size of hands, similar to a classic radio or similar to a game controller?) and just personal preference, mostly.
As for the Sim, I think Liftoff has a native Linux port, but these days most of the sims should just work anyway with the recent developments of valve for the steamdeck.
No matter which kind you pick, you always start with a simulator unless you have more money than sense. There are free ones, and good ones aren’t expensive either. Radios these days can just be plugged into a computer so you’re using your actual controller for the simulator, too.
Very short answer: Get any of the opentx/edgetx transmitters (like radiomaster, jumper). go for expressLRS as a protocol for transmitter/receivers (2.4g). The default firmware for flying yourself is betaflight (racing, acro, some camera drones like cinewhoops). If you want the drone to fly itself (gps missions) it’s probably ardupilot, but check legality in your area first. I have no direct recommendation for video for you, sorry.
Of course they can interact with it just fine, look at “sponsorblock” plug-in. It would also solve this problem completely. It already exists and works well, it just isn’t “AI” nonsense.
Yea imagine this was a video of soldiers of some state murdering people. Same argument. You still agree? Also a video of one (or more) stabbings.
Nothing is “obvious” about that. What you present as the only possible conclusion from their actions is just your subjective interpretation. Could be true, of course. I highly doubt it (which is my subjective interpretation).
Someone realized that the investment required for making a PC port (or having the studio include it) is less than the money you can make from selling it on PC. Selling consoles (the hardware) isn’t what makes them money, it’s reasonably common for them to be sold at a loss, especially early in the life cycle. Profit comes from people buying games they take a cut from, which is unchanged if Sony is also the publisher (or even the developer).
In any case, if I’m right or wrong isn’t even the point either (I’m probably wrong, too). The point is it’s incredibly complicated, and nothing is even slightly “obvious” about it.
Really? “Urge to do moves/actions from it in real life” is the same as thinking or dreaming about it?
From my experience with the Tetris effect, not one occurrence fits his description, but I experience the Tetris effect in most weeks in my life. That’s why it feels like such a disconnected description for me.
That is a pretty bad description of the Tetris effect. Also incredibly misleading. The very short description from Wikipedia reads:
The Tetris effect occurs when someone dedicates vast amounts of time, effort and concentration on an activity which thereby alters their thoughts, experiences, dreams, and so on.
Yup, it would be. But many people are, so they changed that it’s displayed at all by default.
Since the other comment didn’t Go into detail: Microsofts “Recall” will so that on every Windows 11 PC soon. Literally index everything you do or look at, OCR-ing periodic screenshots. Also storing them, possibly including sensitive information like this.
Well to my knowledge there are (or at least were) workarounds to get win 11 to install anyway. It of course worked fine, despite saying it needed a TPM and/or specific minimum CPU.
From an eWaste perspective Microsofts decision to force literally millions of PCs into fake obsolescence is obviously horrible. And I honestly have no idea what their motivation even was for this.
As for trying Linux, these days it really isn’t even a weekend. Sure if you want to tinker and learn, you can invest a weekend. But if you want to just use the PC just pick any of the commonly recommended distros and just go. It’s installed in minutes and you can honestly just use the PC for whatever you used to use it before. Just backup/move your data off it and you got nothing to lose but like an hour, if it really doesn’t work as you need it to.
Nextcloud can’t do two-way sync on Android. At all. That’s like core functionality for the product IMHO and there’s a feature request open I think. When I found that out, I basically spit out my coffee. It’s fine if you just want to upload photos you take, that kinda works (but my god is it fragile).
Nextcloud is pretty good at quite a few things, including extensibility, but having some omissions in functionality that boggle the mind.