I have some jet lighters in my shop. I’m not a smoker but they are useful for other things too. My problem is that they seem to not work at all?

When I buy them they are fine, push the button, clear “click” sound and a fine hot jet of fire. After a while though, they simply won’t fire anymore, even though the little window shows that there’s plenty of gas inside.

Are these also using the normal propane/butane as regular lighters?

  • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
    link
    fedilink
    English
    arrow-up
    14
    ·
    edit-2
    10 months ago

    The ones they sell at smoke shops and gas stations, in my experience, are total crap. I spent the money on a good kitchen torch specifically for dabbing, but it also comes in handy as a kitchen torch for when I crave creme brulee. It hasn’t failed me in 5+ years.

    If you want something smaller, perhaps a good, fancy cigar lighter would be worthwhile. Something a real tobocabnist would sell; not the head shops or vape and cigarette stores.

  • Fondots@lemmy.world
    link
    fedilink
    arrow-up
    13
    ·
    10 months ago

    Usually problems with refillable butane lighters are because they have air trapped in them, and they need to be bled, lots of guides with pictures and such for that online but basically just take a small screwdriver and press the little fill valve until it stops hissing then refill it, do it in a well ventilated place away from sparks and open flames of course

    Sometimes that valve is also slotted to make some adjustments and you can try fiddling with that

    Yes, they use the same butane as other lighters, it’s not the same thing as lighter fluid in case that’s what you have in mind, it comes in sort of a little aerosol can with a skinny tube sticking out the top instead of a spray nozzle. I’m not aware of any propane lighters out there

    Also, in my personal experience, torch lighters just tend to go bad after a while and no amount of fiddling with them will make them reliable again. To be fair I’ve always had cheap torch lighters so maybe that’s just a case of getting what you pay for, maybe nicer lighters are more reliable.

    • PlutoniumAcid@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      10 months ago

      Thank you for the tip about bleeding the air out, I will look into that.

      Yes, the gaseous version, not fluid. Cans here in Europe are typically marked as “propane/butane” so maybe it’s some mix of those gases.

      • Fondots@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        10 months ago

        I wouldn’t be surprised if the lighter gas we get here in the states is also a mix of gases, I’d be lying if I said I ever read the whole can so maybe it even says so somewhere in the fine print, but I’ve only ever seen it marked as butane here, so I figured I’d throw it out there in case someone reading it tried to refill their lighter from their grill tank

  • Tangent5280@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    10 months ago

    Maybe the pressurised devices just lose pressure with use - not enough to be completely useless, but enough for no more jet.

    • PlutoniumAcid@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      10 months ago

      As long as the stored gas is in liquid form, the pressure will be sufficient, and when there’s some kind of window to peer into the container, that’s easy to confirm.

      • Tangent5280@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        10 months ago

        The gas stays liquid over a wide range of pressures - you wouldnt see any difference visually. On the higher pressure side, the gas comes out at higher pressure and therefore more mass is ejected per unit time. At lower pressure the gas comes out, sure, but perhaps not fast enough to give that jet effect.

  • hoshikarakitaridia@sh.itjust.works
    link
    fedilink
    arrow-up
    3
    ·
    10 months ago

    Had the same problem and mine had a little thing at the bottom you could turn with a screwdrive to open or close the gauge a bit. I think I fiddled with it and when I closed it a bit it got stable again.

  • _haha_oh_wow_@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    10 months ago

    I don’t smoke either but I use jet lighters for all sorts of things from gear maintenance to soldering, they’re super handy!

    As long as it’s not clogged, try completely purging your lighter, then refilling it. The pressure is probably off. I usually do this by holding the plunger down with a rubber band and letting it off gas until it’s empty.

    If it is clogged, consider using higher quality butane: This can eliminate clogs in the future.