For me it is the fact that our blood contains iron. I earlier used to believe the word stood for some ‘organic element’ since I couldn’t accept we had metal flowing through our supposed carbon-based bodies, till I realized that is where the taste and smell of blood comes from.

  • Snowplow8861@lemmus.org
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    If you take an engine out of a car and try to spin it by turning the crank shaft, it will be hard to turn because the cylinders need to compress air (it’s required before adding fuel and spark to explode that compressed air so it expands).

    When that engine is in the car, and you don’t add fuel and spark, then the cars wheels have to turn the engine and compress that air, thousands of times per minute. That force that the wheels have to send to the engine to spin that engine slows you down.

    I’m thinking you think the engine itself has a brake on it… No.

    • alokir@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      1 year ago

      I’m thinking you think the engine itself has a brake on it… No.

      Of course not. I know it’s not an actual brake but it comes from the engine’s resistance to spin on higher rpms, so when you shift to a lower grear the rpm goes up, which “activates” this resistance.

      What I’m confused about is the relation between idling and engine brakes.

      Even without giving it additional gas the engine is still idling, so on a level road you could travel with a certain speed without pressing the gas pedal.

      So what happens when you’re going downhill, you don’t press the gas pedal and the engine brake effect kicks in? Does idling not consume fuel anymore?

      I think I’m missing some information that would put everything in its place for me.

      • paul@techy.news
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        When you’re engine braking—like when you downshift and let off the gas—the ECU often cuts off fuel to the cylinders. The throttle valve is also closed. In this scenario, your RPMs are maintained by the car’s forward motion, which is connected through the drivetrain back to the engine.

        So yeah, you’re not using any fuel in that case, but you’re still turning the engine over. The wheels are essentially driving the engine instead of the other way around. That’s how you can have RPMs but no fuel flow during engine braking. The energy to keep the engine turning is coming from the car’s inertia.

        A common example would be going downhill. You downshift to a lower gear, take your foot off the gas, and let the engine do the work to help slow you down. You’ll see the tachometer showing RPMs, but fuel flow is minimal or even cut off, thanks to our friend the ECU.

        • alokir@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          1 year ago

          So basically because you have more than enough rpms to maintain idling the engine knows to turn off fuel injection until it needs to exert force again?

          I’m thinking of a scenario when you start on a level road, reach a slope going downhill, then reach a level road again. Then the engine first consumes fuel, then it shuts it off, then eventually on again, without me pressing the gas pedal at any point?

          • paul@techy.news
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            yeah, exactly. I don’t know enough about the implementation details to know if it is actually consuming 0 fuel though but there’s not much work the engine is actually doing.

          • paul@techy.news
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I’m not exactly sure how it worked in practice, but if it’s anything like simple aircraft engines with carbs, there’s a mixture control that you’d use in addition to the throttle to control air intake.

      • Snowplow8861@lemmus.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Look it depends on the age of the car, but let’s take an old manual car for example.

        On those cars, there’s a fuel map to rpm. There’s actually a few maps including throttle and ignition timing. But think of a spreadsheet of rpm and fuel at a certain throttle load.

        At 0 throttle: The map says to stop the engine from stealing at under say 800 rpm it needs to have fuel added at rpms lower than that to speed up the engine to avoid stalling. At 800rpm it needs a consistent amount kind of a known amount that keeps it in equilibrium. At over 800rpm it needs less fuel the more rpm it has over the idle 800rpm until it’s zero fuel.

        And you’ll feel that, you’ll feel that moment the car starts adding fuel because if you’re only engine braking to a stop your car will get near that idle rpm and your engine will start adding power to avoid a stall, and your braking will diminish.