This is not a conversation about guns. This is a conversation about items that have withstood abuse that are near unbreakable.
Some items I have heard referenced as AK47 of:
Gerber MP600: It’s a multi tool
Old Thinkpad Laptops
Mag lights
Toyota Hilux
The P4$.FL 44 BF.A OBVIOUSLY guys why has no one mentioned it? Jesus Christ it’s like you want them to break!
^The comments in this thread
Carolina Outdoor Work Boots.
Like wearing a bulletproof vest on your feet.
That metal toaster we got for a wedding present. It was apparently someone’s parents wedding present from the 60’s. We had it for several years until a friend jammed a bagel in it and melted the cord. I replaced the cord and we used it for another several years before losing it in a move.
I like to believe someone found it and it is still toasting to this day.
Was it one of those automatic toasters? Technology connections made a video on it.
Aeropress coffee maker.
Its like 20$, works really well, very simple design with few things to break.
What’s a French press? I’ve only seen drip pots in my life so I’m completely ignorant to the coffee world.
It’s like a small pitcher with a movable filter, you put in the ground coffee, hit water, stir, wait, push down the filter with the grounds, pour off the coffee with most of the ground staying in the French press.
There is a Sub-Lem for that: https://slrpnk.net/c/buyitforlife
I thought we called them communities, but honestly I like sub-lem better. Let’s switch if we haven’t already.
Bodum French Press
Dynavap DHV
Buffalo Bicycles
Vitamix Blender
Gotta be the KitchenAid mixers no? Especially the older ones. I have a friend that has one from his grandma that’s over 50 years old. If anything breaks, it’s usually a gear or something simple to fix, and the parts are easy to buy and generally cheap.
The mixers are not exactly cheap though… and their other stuff is now mostly made from plastic (like the food processors for example)
I’ve managed to get a hold of 3 of the old ones through garage or estate sales, but yeah the ones that are brand new have plastic parts in them which drives me crazy. But you can at least 3d print what you’re missing
Pre-2010 Toyota Corolla
Camry too.
Shure SM58/57
SM57s still can get roughed up pretty bad with the plastic covering on the front of the mic (especially if miking a snare drum with a less than precise drummer). SM58 will survive a nuclear war.
Concept2 rowing machines. Even if they break, you can still buy spare parts at reasonable rates even for the very first model, which is decades old and only sold a few copies. Fantastic engineering.
Hold their value like crazy too even if you don’t like them you likely lose nothing if not very very little.
It’s a real baader-meinhoff phenomenon: once you notice them, you notice that every gym has them.
Akai 4000ds Reel to Reel tape player. So many are still working, built like a tank. They’re super cheap on the used market.
The Logitech x3d Xtreme or whatever the hell it’s called. it’s a $34 flight stick, best one you can get for cheap, and after having and abusing it for years it only had any issues after a rottweiler puppy chewed the cable. Would recommend.
Pre GM SAABs. I’ve personally gotten 2 of my 5 to over 1,000,000 miles on the original engine and transmission. Both manual transmission. A couple hundred of them have made it to 2,000,000 world wide. The lowest milage I killed a SAAB at was 789,000 miles. I hydroplaned into a semi on I-75, and the car still technically ran, but I gave it to my parents as a parts car. Just read the owners manual, and be absolutely religious about basic maintenance.
Oh, and the turbos don’t like low octane fuel. It gums them up.
How does a turbo that intakes air get gummed up from low octane fuel? Maybe oil is the issue since turbos have oil seals. Maybe I’m missing some unknown factor on turbos.
It’s not the actual turbo that gets gummed, the fuel system is what gums up, but for some reason it’s far worse on the turbo versions of the cars. I could put low octane into the non turbo SAABs I had, and it didn’t gum up the intake the way the turbo versions did. I don’t know why.
Fuel lines degrade under lower octane perhaps. Sounds like a design flaw. I’ve always heard from my car auction and dealer friends that SAABs are junk through and through. I’ve heard it countless times. Hmm…
Nah, Americans just don’t like to read the manuals, and they got a bad reputation in the late '70s and early '80s when they first put turbos into the cars, because you had to pull into the driveway, and let the turbo spin down for at least 30 seconds to a minute. If you didn’t, the turbo would seize and then shred itself when you turn the car back on.
Also American mechanics don’t like the fact that the engine is not in the configuration they are used to. It’s rotated 90° on the z axis and 45 on the x axis. Absolutely solid tanks if you actually read the manual, and followed the routine maintenance recommendations.
Sounds like a giant pain to work on but I’m interested in doing some reading just to learn about something that can potentially contradict what I’ve always heard. Thanks. I’ll look into this.
Once you wrap your head around the new orientation of things, it’s actually really well designed to work on. I figured the mechanics just didn’t want to learn anything “new”
I’m just interested in super high mileage capable vehicles. For instance my cousin has a 12v Cummins diesel and it has over 1m miles. 750k ish when he got it 10 years ago.
The EV 635A. Built. To. Last.
http://recordinghacks.com/reviews/tapeop/electro-voice-635a/
I swear to god - on a dare I used one as a hammer and it lost 0 range on the SA.
Toughest mic and best DR of it’s 1965 class. Still a viable non-phantom , mono drum or ambient mic.
True believer!
The wrt54g. They don’t make wifi routers like they used to.
Careful now, they are too old to be secure. I’d switch to TL-WDR4300.
That’s what I’m running, though I had issues with it randomly requiring a reset. Installing OpenWrt fixed that problem.
Yup, WDR4300 on OpenWRT is the way to go.
Had that running on my main router until a newer one came along. Now it’s still going strong, but as a wifi repeater.
I bought one specifically for DD-WRT firmware way back when. I now rock a gigabit mesh system but that wrt lasted almost a decade before tech moved on enough for me to switch.
